Know what your fence will actually cost
— before you call a contractor.

Nationally, installed fencing runs about $10 to $60 per linear foot depending almost entirely on material choice. Chain link and split rail sit at the low end around $10–$20/ft, mid-range wood and vinyl run $20–$45/ft, and premium materials like aluminum, composite, and wrought iron run $30–$85/ft. Height, terrain, gates, and your region shift any of these numbers up or down.

Fencing is priced by linear foot of fence line, not by the square footage of your lot. Walk the exact path the fence will follow — including any jogs around structures — and measure it, rather than calculating a simple rectangle from your property's width and depth. Irregular lots typically need 10–20% more linear footage than a basic perimeter estimate would suggest.

Labor typically makes up 30–45% of an installed fence price, so a full DIY install can save a meaningful amount — but material-only costs for panel systems like vinyl or composite are harder to reduce since the products themselves are priced similarly whether a contractor or homeowner buys them. The most common partial-DIY savings are removing the old fence yourself (saving roughly $3–$8 per linear foot) and doing your own painting or staining.

It depends on your municipality and fence height. Fences at or below 6 feet often don't require a permit in many areas, while fences at 8 feet — common for security or noise reduction — trigger a permit requirement in most U.S. counties. Permit fees generally run $50–$500. Always confirm with your local building department before digging, and call 811 first to have utility lines marked.

Split rail and chain link are the least expensive options, typically $8–$35 per linear foot installed. Split rail is cheapest per foot but offers no privacy or reliable pet containment; chain link costs slightly more but adds basic security and durability. If you need privacy on a tight budget, pressure-treated pine is usually the lowest-cost solid option.

Vinyl typically costs 25–40% more than wood upfront but needs no staining, sealing, or board replacement, while a wood privacy fence usually needs $500–$1,500 of maintenance per decade. Over a 15–20 year ownership horizon, vinyl's total cost of ownership often comes out even with or below cedar, even though the sticker price today is higher.

A standard walk gate (3–4 ft wide) typically adds $150–$500 installed, while a wider drive or double gate built for vehicle access runs $600–$1,600. Gates cost more per foot of opening than straight fence line because each one needs its own frame, hinge hardware, and a latch engineered to swing freely and stay secure.

Yes. Sloped ground requires either a stepped fence line (panels installed in level sections with small drops between them) or a racked fence line (panels angled to follow the grade), and both approaches take longer to install than a flat run. Expect roughly 15–30% more in labor cost for a sloped yard versus flat ground.

Lifespan varies widely by material: pressure-treated pine and chain link generally last 15–20 years, cedar and aluminum last 20–40 years, and vinyl, composite, and steel ornamental fencing can last 25–50 years with basic upkeep. Climate, soil moisture, and maintenance frequency all shift these ranges in either direction.

Many neighbors informally split the cost of a shared boundary fence, though there is no legal obligation to do so in most jurisdictions unless local ordinance or an HOA agreement says otherwise. If you're considering it, put the split, the material choice, and who owns future maintenance in writing before work starts.